Urban paint and furniture
فروردین ۱۸, ۱۴۰۰Children’s play equipment, metal or polyethylene?
فروردین ۱۸, ۱۴۰۰As we know, the use of cameras in today’s cities is very important for the traffic police to better control traffic, control and manage various traffic restrictions and provide accurate judgments in accidents. In urban environments and spaces, different types of camera stands are used to install different types of traffic cameras, which are different and varied depending on the location of the camera and the type of camera.
Traffic camera stands are usually designed and manufactured in both vertical and L-shaped, depending on the type of camera deployment. But the point that is very important is the sensitivity of the camera lens to the vibrations caused by the wind and possible vibrations caused by the movement of vehicles, etc., which in photography and video recording can lead to blurring of the image and ultimately blurring Be it. To prevent these vibrations, the thickness of the body and the diameter of the camera stand, as well as the clamps and connection points in them, should be more than the street light stand.
The base of traffic cameras is often designed and built with a multi-faceted body and a conical geometric shape (incomplete cone). In most cases, the components of the cone overlap, or overlap, and so-called collapse. Of course, the use of a cylindrical camera base with a multifaceted body is sometimes used, in which case the connection of the parts will be seen by the base plate and with bolts.
But apart from the traffic uses mentioned above, the use of CCTV cameras is also used to monitor and protect against theft. In houses, factory walls, yards, warehouses, etc .; In these cases, for outdoor binoculars that should be installed outdoors and indoors, the binoculars base is used at the desired heights and in the required number.
To extend the life of the base of the camera, instead of using paint, they use hot-dip galvanized coating. Hot-dip galvanized coating in micron thicknesses (from 30 to 200 microns) in the galvanizing process sits on the body of the bases and prevents them from rusting and corrosion to a great extent, to the extent that it increases the useful life of the base up to 10 times .